PREP 4H
BUILT-IN LIFT WITH IMMERSION PREP 4 H MODEL
lifter for spray booths and preparation areas
by adjusting the height it can lower under the base or floor making it easier to paint or sand the car without the aid of other means
it has a capacity of 2450 kg and is powered by a 300 bar hydropneumatic air pump with remote control or electric control unit
TECHNICAL SPECIFICATIONS
- maximum height 1125 mm
- hole depth 500 mm
- platform dimensions length 4115 x width 1840 mm
- distance ramps – axis 915 mm
- free width between ramps 1645 mm
- rise time 140 seconds
- descent time 130 seconds
- noise level 70 dB / A (1m)
- total weight of the lifter 1035 kg
- operating temperature 10 ° – 40 ° C
PREP 4 WITH FOOTRESTS
BUILT-IN LIFT WITH FOOTRESTS
Hydropneumatic built-in lift powered by air pump for cabins and preparation areas to facilitate the preparation, assembly and painting of the car
the positioning on the 4 ramps allows full visibility to be able to paint and work without impediments
TECHNICAL SPECIFICATIONS
- capacity 3000 Kg
- minimum height from the ground 280 mm
- maximum height from the ground 1420 mm
- dimensions width 2050 x maximum length 3660 mm
- rise time 70 seconds
- air supply 10 bar
- weight 735 Kg
PREP – T
LIFT MODEL PREP-T
hydropneumatic lift powered by an air pump for cabins and preparation areas to facilitate the preparation, assembly and painting of the vehicle
thanks to the manual opening of the arms, any vehicle in circulation can be lifted
TECHNICAL SPECIFICATIONS
- capacity 3000 Kg
- minimum height from the ground 120 mm
- maximum height from the ground 1130 mm
- dimensions, width and maximum length 740 x 2000 mm
- rise time 180 seconds
- air supply 10 bar
- weight 480 Kg
PREP – K
TRANSLATION SYSTEM FOR PREPARATION ZONES
Basement translation system with guides for moving from the preparation areas to the cooking cabinets by means of trolleys.
The manual system allows you to align even with lifters installed directly in the base of the cabin.
TECHNICAL SPECIFICATIONS
- capacity 2500 Kg
- structure height 110 mm
- variable depending on the cabin
- variable depending on the cabin
- useful lifting 640 mm
- maximum lifting height 740 mm
- minimum lifting height 100 mm
TRANS LIFT CAR
DOUBLE ACTING SCISSOR LIFT TRANS LIFT CAR
Hydropneumatic lift with air pump that allows the movement of the car and lift united thanks to a system of double-acting pistons and four swivel wheels
TECHNICAL SPECIFICATIONS
- capacity 3000 Kg
- minimum height from the ground 100 mm
- maximum height from the ground 920 mm
- dimensions width x length 1010 x 1882 mm
- rise time 75 seconds
- air supply 10 bar
- weight 450 Kg
SPEED LIFT
SPEED LIFT MOBILE LIFT
hydraulic jack built and manufactured to allow the operator to work on wheels or under doors at eye level
the relaunch and descent movement are obtained using a slide fixed to a chain connected to a hydraulic cylinder powered by a hydropneumatic pump; reduced dimensions and considerable maneuverability thanks to the wheels which allow easy movement of the tool
TECHNICAL SPECIFICATIONS
- capacity 1500 Kg
- structure height 1330 mm
- maximum lifting height 990 mm
- dimensions width x length 660 x 1010 mm
- pump pressure 350 bar
- mechanical manual safety
- weight 85 Kg
MINI JACK
MINI LIFT MINI JACK MODEL
easy-to-use mini lift that allows you to quickly lift the car
robust, fast and safe, it is the ideal tool for workshops and body shops powered by a 700 bar hydropneumatic air pump. Equipped with mechanical safety on the frame and non-return valve on the hydraulic jack
TECHNICAL SPECIFICATIONS
- capacity 2500 Kg
- structure height 110 mm
- structure width 400 mm
- structure length 1120 mm
- maximum lifting height 650 mm
- weight 89 Kg
3D – MOVER
LIFT FOR OPERATOR
allows the operator full mobility on the vertical, longitudinal and transverse axes, thanks to the double pneumatic and hydraulic system along the sliding tracks with a special anti-crushing safety device with limit switch at the base of the basket.
TECHNICAL SPECIFICATIONS
- maximum capacity 200 kg
- dimensions 3000 x 2318 x 1140h mm
